Snemljive montaže

Montaže s ponovljivostjo

INNOmount QD Mount for Weaver / Picatinny, 30 mm

Na zalogi

INNOMOUNT QD for Picatinny / Weaver, 30 mm - 14 mm

INNOMOUNT QD for Picatinny / Weaver, 30 mm - 14 mm

INNOmount QD Mount for Weaver / Picatinny, 30 mm

Tako nizko, kot: 329,00 €

BH višina

Previs (KR)

Čas odpreme

Pošiljanje v 1-3 dneh

Možnost vračila

15 dni

Obročno odplačevanje Že od 10,85 € na mesec

Izračun obrokov

Izdelki na zalogi

Stanje

BH višina

Previs (KR)

Cena

Nakup

Na zalogi

17 mm

KR 0.0 mm

329,00 €

Pomoč pri dostavi

Izberite državo pošiljanja in ponudnika dostave

Vaša izbrana lokacija bo shranjena, tudi ko boste brskali po drugih izdelkih. Ob zaključku nakupa boste lahko izbirali med več vrstami plačila.

Vračilo izdelkov Metode pošiljanja Uveljavljanje garancije

Pomoč uporabnikom

ŽELITE NASVET?

Naša izkušena ekipa vam je pripravljena pomagati skozi celoten proces od nakupa do uporabe izdelka. Če imate vprašanja, nas prosimo kontaktirajte.

Kontaktirajte nas

INNOmount QD Mount for Weaver / Picatinny, 30 mm Opis izdelka

Quick Detach Mechanism: Enables fast mounting and dismounting on Weaver/Picatinny rails without tools, ensuring convenience during field transitions in hunting or tactical scenarios.
Precise 30 mm Ring Diameter: Provides a secure fit for 30 mm scope tubes, maintaining zero and protecting optics from movement under recoil.
Robust Aluminum Construction: Machined from high-grade aluminum, offering lightweight durability and corrosion resistance for reliable performance in harsh environments.
Low Profile Design: Minimizes added height and weight, enhancing rifle balance and maneuverability without obstructing sights or accessories.

ABOUT THE SERIES

The INNOmount QD Mount series delivers precision-engineered quick-detach mounting solutions for riflescopes on Weaver/Picatinny rails, featuring aluminum construction, secure clamping, and repeatable zero retention for tactical and hunting use. These mounts emphasize ease of use, durability, and compatibility with various tube diameters and rail systems.

Other models in the QD Mount series include:

INNOmount QD Mount for Weaver/Picatinny, 34 mm
INNOmount QD Mount for Weaver/Picatinny, 25.4 mm
INNOmount QD Mount for Weaver/Picatinny, 40 mm

It targets tactical operators and hunters who value quick adaptability and precision mounting for consistent performance.

ABOUT THE MODEL INNOmount QD Mount for Weaver / Picatinny, 30 mm

This model is optimized for 30 mm scope tubes in the QD series, providing a standard ring size for common optics while featuring the signature quick-detach lever unlike fixed mount variants. It offers 100% return to zero after remounting due to sophisticated QD mechanism. It includes a quick-release lever, aluminum body, recoil stopper made of steel, and compatibility with Weaver/Picatinny rails. Key specs encompass 30 mm ring diameter, heights of 14 mm, 17 mm, 20 mm, or 23 mm, and 120 g weight.

It is intended for hunters and tactical shooters mounting 30 mm scopes, ideal for enthusiasts appreciating quick changes and professionals requiring secure, repeatable zero in variable conditions.

ABOUT THE MANUFACTURER

INNOmount, based in Germany, has been in operation since 2005. The brand is known for its precision engineering in mounting systems, producing high-quality quick-detach mounts and accessories with durable materials for hunting and tactical markets.

MAIN FEATURES

Ring Diameter: 30 mm.
Material: High-grade aluminum.
Mount Type: Quick-detach on Weaver/Picatinny rails.
Height Options: 14 mm, 17 mm, 20 mm, 23 mm.
Weight: 120 g.
Recoil Stop: Made of steel for stability.
Durability: Corrosion-resistant and impact-proof.

WARRANTY

10-year global warranty that covers material and manufacturing defects under normal use.

IN THE BOX

QD Mount
Mounting screws
Allen wrench
User manual

Splošne lastnosti

Proizvajalec	INNOmount
Serija montaž	-
Poreklo	Nemčija
Garancija	10 let
SKU	50-30-xx-00-200

Fizične lastnosti

Nastavitev po smeri	-
Tip daljnogleda	30 mm
Material	Aluminij

Characteristics

Suitable for Compatibility Below	Picatinny Rail, Accuracy International AX308, Accuracy International AX50, Accuracy International AXMC, Accuracy International AT308, Anschutz 1771, Anschutz 1782, Baikal 121 Lis, Baikal 145 Los, Baikal 141 Sobol, Baikal 161 Manul, Baikal MP-161K, Benelli Lupo (weaver), Beretta ARX 100, Beretta ARX 160, Beretta ARX 200, Beretta Rx4 Storm, Beretta Cx4 Storm, Beretta BRX1 (Picatinny), CZ 512 Tactical, CZ 557 Varmint, CZ 557 Range Rifle, CZ 600 Trail, CZ 600 Alpha (Mini), CZ 600 Alpha (Medium), CZ 600 Alpha (Long), CZ 600 Ergo (Mini), CZ 600 Ergo (Medium), CZ 600 Ergo (Long), FN Browning BAR MK3 DBM, Haenel RS8, Haenel RS9, Haenel NXT, Heckler & Koch G36, Kimber Advanced Tactical SOC II, Kongsberg M389, Lakelander 389, McMillan M88, Merkel RX Helix, Mossberg 100 ATR (Picatinny), Mossberg MVP (Picatinny), Mossberg Patriot (Picatinny), Mossberg 100 ATR (Weaver), Mossberg 4x4 (Weaver), Mossberg MVP (Weaver), Mossberg Patriot (Weaver), Ruger 10/22 (Picatinny), Ruger American Rifle (Picatinny), Ruger American Rimfire (Picatinny), Ruger PC Carbine, Ruger Precision Rifle (picatinny), Ruger Precision Rimfire, Ruger Scout, Ruger American Rifle (Weaver), Sabatti Rover Alaskan, Sabatti Rover Hunter, Sabatti Rover Pathfinder, Sabatti Rover Patrol, Sabatti Rover Ranger, Sabatti Rover Scout, Sabatti Rover Shooter, Sabatti Rover Thumbhole, Sabatti Saphire, Sabatti Urban Sniper, Sabatti Tactical EVO US, Sabatti post-2017 Compact Scout, Sabatti ST-18, Sabatti STR, Sabatti pre-2021 STR Sport, Sabatti post-2021 STR Sport, Sako S20, Sako TRG 22/42 A1, Sako TRG M10, Sako 90 XS Picatinny, Sako 90 S Picatinny, Sako 90 SM Picatinny, Sako 90 M Picatinny, Sako 90 L Picatinny, Savage 110 Elite Precision, Savage 110 Magpul Hunter, Savage Model 110 Precision, Savage Model 64 Precision, Savage A17 (Picatinny), Savage A17 (Weaver), Savage A22 (Picatinny) , Savage A22 (Weaver), Savage Axis I (Picatinny), Savage Axis II (Picatinny), Savage Axis I (Weaver), Savage Axis II (Weaver), Savage B.Mag (Weaver), Savage B22 (Weaver), Savage B17 (Weaver), Savage Impulse, Savage Impulse Elite Precision, Savage Model 25 (weaver), Savage 40 Varmint Hunter, Savage 220 Slug , Savage 212 Slug , Schultz & Larsen Tactical, Steel Action HS, Steel Action HM, Steyr Mannlicher Luxus Magnum (Picatinny), Steyr Mannlicher Luxus Standard (Picatinny), Steyr AUG, Steyr Elite, Steyr Elite 08, Steyr HS .50 M1, Steyr Pro Varmint, Steyr Mannlicher SSG 04, Steyr Mannlicher SSG 08, Steyr Mannlicher SSG M1, Steyr Mannlicher Ultra Light, Steyr Mannlicher Pro Hunter II, Steyr Mannlicher THB, Steyr Scout, Strasser RS 14 Evolution, Tikka T3x Tac A1, Voere S16, Zastava M808, Zastava M07, Zastava M93 Black Arrow , Weaver rail
Suitable for Compatibility Above	30 mm

Uporabniška vprašanja

Potrebujete pomoč? Niste prepričani, če je izdelek pravi za vas? Ne oklevajte - vprašajte našo skupnost, ki je tukaj, da vam pomaga pri vprašanjih o izdelku.

Pozdravljeni, ali bo ta nastavek ustrezal moji puški Sako 90 S Varmint (22-250 cal.)? Hvala, Phil

Hi, will this mount fit on my Sako 90 S Varmint (22-250 cal.) rifle? Thanks Phil

od Philip

Spoštovani gospod,

Ali nam lahko na naslov [email protected] pošljete fotografije sprejemnika skupaj s ključnimi merami?

Tako bomo lahko preverili, ali je nosilec INNOmount združljiv s pištolo Sako 90 S Varmint.

Če vam lahko pomagamo še pri čem, nam to sporočite.

Lep pozdrav

Dear Sir,

Could you please send us photos of the receiver along with the key measurements to [email protected]?

This will allow us to check whether the INNOmount is compatible with the Sako 90 S Varmint.

If there is anything else we can assist you with, please don’t hesitate to let us know.

Best regards

od Optics Trade team

Pozdravljeni.
Imam Sako S20 Hunter in želim namestiti digitalni daljnogled Hickmicro TD50L za nočni vid.
Ali je montaža INNOmount QD Mount for Weaver / Picatinny, 30 mm (20 mm višine BH) dobra izbira? Ali naj raje izberem montažo INNOmount ZERO Mount for Weaver / Picatinny, 30 mm (enaka višina BH)?
Kaj priporočate? Ali obstaja še kakšna druga možnost, ker uporabljam pritrjen osvetljevalec?
Želel bi snemljivo montažo, da bi lahko ta daljnogled uporabljal tudi v svojem CZ 527 Lux, ki je imel nameščeno Picatinny rail.
Hvala, Nuno

Hello.
I have a Sako S20 Hunter and am looking to mount a Hickmicro TD50L, night vision digital scope.
Is the INNOmount QD Mount for Weaver / Picatinny, 30 mm (20mm of BH height) a good choice? Should I, instead, choose the INNOmount ZERO Mount for Weaver / Picatinny, 30 mm (same BH)?
What you recommend? Any other option, since I use de illuminator attached?
I want a detachable mount, to use also this scope in my CZ 527 Lux, that was a Picatinny rail installed.
Thanks Nuno

od Nuno

Spoštovani gospod!

Za obe puški in optiko, ki jo opisujete, priporočamo INNOmount Zero za Picatinny rail s 30 mm obročem in BH 20 mm. S to montažo ne boste imeli težav z uporabo daljnogleda na dveh različnih puškah, če boste uporabljali vgrajene profile za ničliranje.

Dear Sir!

For the both rifles and the optics you are describing, we would recommend INNOmount Zero for Picatinny rail with 30mm ring and BH 20mm. With this mount you will have no problem using the scope on two different rifle, if you will be using inbuilt zeroing profiles.

od Optics Trade team

Pozdravljeni.
Imam puško Sako S20 Hunter in želim namestiti svoj digitalni puškomitraljez INFIRAY Tube TD50L za nočni vid v snemljivo montažo INNMOUNT.
Razmišljal sem, da bi kupil montažo INNOmount QD za Weaver / Picatinny, 30 mm. Ali je višina BH 20 mm primerna? Ali bi bilo bolje, če bi bila višina 23 mm?

Ali bi imel kakšno prednost, če bi izbral nosilec INNOmount ZERO?
Hvala, Nuno

Hello.
I have a Sako S20 Hunter and am looking to mount my INFIRAY Tube TD50L Digital Night Vision Riflescope, in a INNMOUNT detachable mount.
I was tinking to buy a INNOmount QD Mount for Weaver / Picatinny, 30 mm. Is the 20 mm BH height suitable? Or the 23 mm would be better?

Alternatively, would I have any advantages in choosing the INNOmount ZERO Mount?
Thanks Nuno

od Nuno

Spoštovani gospod!

Nosilec INNOmount je primeren že z višino 20 mm in ne potrebujete različice Bh 23 mm.

INNOmount Zero ima to prednost, da ga je mogoče namestiti na več Picatinnyjevih vodil in bo vedno imel ustrezno vpenjalno silo. V resnici to pomeni, da lahko isti digitalni daljnogled uporabljate na več puškah in za vsako puško samo izberete ustrezen profil za ničliranje. Z običajnim nastavkom QD ga lahko uporabljate le na eni puški in ne več, saj je vpenjalna sila nastavljena le na eni Picatinnyjevi tirnici.

Dear Sir!

The INNOmount will be suitable already with 20mm height and you do not need the Bh 23mm version.

INNOmount Zero has an advantage that it can be mounted on multiple Picatinny rails and will always have the appropriate clamping force. In Reality that means that you can use the the same digital scope on multiple rifles and just choose the corresponding zeroing profile for each rifle. With the normal QD mount you can use it only on one rifle and not more, since the clamping force is set only on one Picatinny rail.

od Optics Trade team

Hello.
I have a Sako S20 Hunter and am looking to mount PARD TD62-70 850 Thermal Night Vision LRF Rifle Scope.
I was tinking to buy a INNOmount QD Mount for Picatinny, 30 mm. What BH height would you recommend ? Should i chose 14mm? Or you have another recomendations regarding scope mounts?
Thanks in advance Kaspars.

od Kaspars

Dear Sir!

We would recommend the BH option = 20mm and we are sure that this setup will be of the right height.

od Optics Trade team

Hi
I have bought a Thermal Hikmicro thunder 2 scope. I wanted to fit it to my Tikka 243 but also have the capability to take it off and fit it to my Air Arms pellet gun also without having to re zero. is this possible to do?

thanks in advance

od martin

Dear Martin!

We would do this the following way.

1. For the scope we would recommend the following scope mount: https://www.optics-trade.eu/en/innomount-zero-for-picatinny-rail-hikmicro-thunder-th35.html

2.. For Tikka rifle the following Picatinny rail: https://www.optics-trade.eu/en/contessa-picatinny-rail-for-tikka-t3-0-moa.html

3. For Air rifle with 11mm dovetail on top the following picatinny rail: https://www.optics-trade.eu/en/recknagel-picatinny-rail-for-11-mm-dovetail.html

You will need to zero the scope on both rifles under different balistic profiles and use them accordingly, when swiching from one rifle to another.

od Optics Trade team

Hello.
I have a Sako S20 Hunter and am looking to mount a Schmidt & Bender Klassik 3-12x50.
I was tinking to buy a INNOmount QD Mount for Weaver / Picatinny, 30 mm. What BH height would you recommend ? Should i chose 17 mm, or 14 mm?
Thanks Nuno

od Nuno Canhoto

Dear Mr Nuno,

thank you for your message.

We would recommend a BH height of 14 mm.

Thank you for your understanding and please do not hesitate to contact us at [email protected] if we can assist you in any other way.

Kind regards

od Optics Trade team

Hi i have a Merkel helix and am looking to mount a swaro z5i 3.5x18x50 what mount and height would you recommend.

Thanks
Patrick

od Patrick

Dear Sir,

thank you for contacting us.

We would recommend a BH height of 17 mm for your setup.

If you have any further questions or concerns, please do not hesitate to contact us directly at [email protected]. We are here to help.

Kind Regards,

od Optics Trade team

Nedavno sem pri vas kupil nosilce innomount piccatinny/weaver 30 mm qd. Optiko sem namestil na svoj sako 90 243 varmint in v zaklepu zadnjega nastavka je viden premik. Gibanje je še vedno vidno, ko je zategnjeno. V čem je lahko težava?

I recently purchased innomount piccatinny/weaver 30 mm qd mounts from you guys. I fitted the scope to my sako 90 243 varmint and there is visible movement in the rear mount lock. The movement is still evident when tightened. What can be the problem?

od Steve

Dragi Steve,

zahvaljujemo se vam, da ste nas kontaktirali.

Prosimo vas, da se za nadaljnjo pomoč v tej zadevi obrnete neposredno na nas na naslov [email protected].

S spoštovanjem,

Dear Steve,

thank you for contacting us.

We would like to ask you to contact us directly at [email protected] for further assistance in this matter.

Kind Regards,

od Optics Trade team

Zdravljeni, imam Beretta BRX1 in želim namestiti to montažo s Steiner Ranger 4 2,5-10x50. Kateri BH priporočate? Lep pozdrav

Hello I have a Beretta BRX1 and I want to install this mount with Steiner Ranger 4 2,5-10x50. What BH do you recommend? Best regards

od Pedro

Dragi Pedro,

zahvaljujemo se vam, da ste nas kontaktirali.

Višino BH za vašo nastavitev priporočamo 17 mm.

Če imate dodatna vprašanja ali pomisleke, se obrnite neposredno na nas na naslov [email protected]. Pripravljeni smo vam pomagati.

S spoštovanjem,

Dear Pedro,

thank you for contacting us.

We would recommend a BH height of 17 mm for your setup.

If you have any further questions or concerns, please do not hesitate to contact us directly at [email protected]. We are here to help.

Kind Regards,

od Optics Trade team

Mam Steyr Ultra Light v kalibru .308. Puška ima na vrhu mehanizma vgrajeno osnovo tipa weaver. Nosilci, ki so primerni za moj 30-milimetrski daljnogled, imajo med cevjo daljnogleda in vrhom akcije 13 mm. Dva utora v akciji, ki sta namenjena nastavkom za odmet, sta med seboj oddaljena 100 mm. Prosim, povejte mi, kakšno kakovostno odstranljivo montažo iz aluminija priporočate, ki se bo vrnila na ničlo.

I have a Steyr Ultra Light in .308. The rifle has a weaver type base built in to the top of the action. Mounts that are good for my 30mm scope have 13mm between the scope tube and the top of the action. The two groves in the action for the recoil lugs are 100mm apart. Please tell me what quality removable mount in aluminium you recommend that will return to zero.

Slike

INNOmount QD Mount for Weaver / Picatinny, 30 mm

od Michael

Dragi Michael,

zahvaljujemo se vam, da ste nas kontaktirali.

Montaž INNOmount, ki ga omenjate, bo dobro deloval z vašo puško Steyr, vendar se prepričajte, da uporabljate 30 mm optiko za ta konkretni nosilec.

Za dodatna vprašanja nas kontaktirajte na [email protected]

S spoštovanjem,

Dear Michael,

thank you for contacting us.

The INNOmount that you are referring to will work well with your Steyr rifle, however, please make sure that you are using 30 mm optics for this particular mount.

For additional questions, please contact us at [email protected]

Kind Regards,

od Optics Trade team

Zdravljeni, iščem to montažo z apleksom 4k na Sako s20 in me zanima, ali je to najboljša možnost zaradi očesnega reliefa ect. Kakšno razmišljanje, ali je to najbolj primerno ali pa bi bili boljši enojni obročki za daljnogled. Hvala

Hi I’m looking to pair this scope mount with the aplex 4k on a Sako s20 and was wondering if this is the best option due to eye relief ect. Any thoughts if this is the best suited or if the singular scope rings would be better. Thanks

od Clark

Dragi Clark,

zahvaljujemo se vam, da ste nas kontaktirali.

Na spodnji povezavi priporočamo primeren nosilec Hikmicro Alpex 4K.

https://www.optics-trade.eu/en/innomount-for-weaver-picatinny-pulsar-digex.html

Če imate dodatna vprašanja ali pomisleke, se obrnite neposredno na nas na naslov [email protected]. Tu smo, da vam pomagamo.

S spoštovanjem,

Dear Clark,

thank you for contacting us.

We would recommend the Hikmicro Alpex 4K suitable mount on the link below.

https://www.optics-trade.eu/en/innomount-for-weaver-picatinny-pulsar-digex.html

If you have any further questions or concerns, please do not hesitate to contact us directly at [email protected]. We are here to help.

Kind Regards,

od Optics Trade team

Hi im looking at a innomount one piece quick release for a picatinny rail what height do you suggest for a hawke sidewinder 6x24x56 scope

od Eddie

Dragi Eddie,

zahvaljujemo se vam, da ste nas kontaktirali.

Priporočamo višino BH 20 mm.

Če boste potrebovali nadaljnjo pomoč, se lahko ponovno obrnete na nas.

S spoštovanjem.

Dear Eddie,

thank you for contacting us.

We recommend the BH height 20mm.

Should you require any further assistance, please do not hesitate to contact us again.

Kind regards.

od Optics Trade team

Mam Sako s20 308 win. Nameravam vgraditi hik micro alpex 4k, kakšen bh priporočam Pozdravljeni Bryan

I have a Sako s20 308 win. I intend to fit a hik micro alpex 4k what bh do recommend Regards Bryan

od Bryan

Dragi Bryan,

zahvaljujemo se vam, da ste nas kontaktirali.

Priporočamo vam to montažo:

- https://www.optics-trade.eu/en/innomount-for-weaver-picatinny-pulsar-digex.html

Če boste potrebovali nadaljnjo pomoč, se lahko ponovno obrnete na nas.

S spoštovanjem.

Dear Bryan,

thank you for contacting us.

We recommend this mount:

- https://www.optics-trade.eu/en/innomount-for-weaver-picatinny-pulsar-digex.html

Should you require any further assistance, please do not hesitate to contact us again.

Kind regards.

od Optics Trade team

Zdravljeni! Imam Sauer 101, kaliber 300 win mag.Kakšno višino bh priporočate za Zeiss conquest v6 2-12x50? Hvala za vaš odgovor! Lep pozdrav, BZ

Hello! I have a Sauer 101 caliber 300 win mag.What bh height do you recommend for a Zeiss conquest v6 2-12x50? Thank youfor your ansver! Best regards, BZ

od Zoltàn

Dragi Zoltàn,

hvala za vaše sporočilo.

S tem nastavkom priporočamo BH 14 mm.

Hvala za razumevanje in ne oklevajte, če vam lahko pomagamo na kakršen koli drug način, nas kontaktirajte na [email protected].

S spoštovanjem

Dear Zoltàn,

thank you for your message.

We recommend a BH of 14 mm with this mount.

Thank you for your understanding and please do not hesitate to contact us at [email protected] if we can assist you in any other way.

Kind regards

od Optics Trade team

Mam Benelli Lupo v kalibru 6,5 creedmoor. Imam daljnogled Steiner predator 8 2-16x42, ki ga lahko namestim na EGW picatinny rail montažo. Kakšno višino naj kupim za to nastavitev?

I have a Benelli Lupo in 6.5 creedmoor caliber. I have a Steiner predator 8 2-16x42 scope to mount on a EGW picatinny rail mount. What height should I buy for this setup?

od David

Dragi David,

zahvaljujemo se vam, da ste nas kontaktirali.

Višino BH svetujemo 14 mm, da boste lahko udobno delali.

Za dodatne informacije o zadevi se obrnite neposredno na nas na naslov [email protected]

S spoštovanjem,

Dear David,

thank you for contacting us.

We would advise the BH height of 14 mm in order to work comfortably.

For additional information on the matter, please contact us directly at [email protected]

Kind Regards,

od Optics Trade team

Zdravljeni! Ali bo ta nastavek ustrezal ruskemu Picattinyjevemu vodilu CZ 557 SA ? https://www.optics-trade.eu/en/rusan-picatinny-rail-cz-557-sa.html Picattinyjevo vodilo je dolgo 12,5 cm in nisem prepričan, ali ni malo kratko za ta nastavek. BR, Andris

Hello! Will this mount fit on Rusan Picattiny CZ 557 SA rail ? https://www.optics-trade.eu/en/rusan-picatinny-rail-cz-557-sa.html Picattiny rail has 12.5 cm length and I am not sure if it is not little bit short for this mount. BR, Andris

od Andris

Dragi Andris,

zahvaljujemo se vam, da ste nas kontaktirali.

Ta pritrditev INNOmount bo ustrezala vaši Rusan Picatinny rail, čeprav je res, da je skupna dolžina pritrditve nekoliko večja od rail-a, vendar so mehanizmi fiksni.

Za dodatne informacije v zvezi s tem se obrnite neposredno na nas na naslov [email protected]

S spoštovanjem,

Dear Andris,

thank you for contacting us.

This INNOmount will fit your Rusan Picatinny rail, although it is true that the overall length of the mount is slightly more than the rail, however, the mechanisms are fixed.

For additional information on the matter, please contact us directly at [email protected]

Kind Regards,

od Optics Trade team

Zdravljeni. Imam steyr mannlicher classic. Želim namestiti pulzar termion 2 xq38. Ali bo ta nosilec deloval in kakšno višino predlagate Hvala, Mervyn

Hi. I have a steyr mannlicher classic. I want to mount a pulsar termion 2 xq38. Will this mount work and what hight do you suggest Thank you Mervyn

od Mervyn

Drage gospod,

zahvaljujemo se vam, da ste nas kontaktirali.

V skladu z navedenimi informacijami vam priporočamo naslednje držalo:

- INNOmount for Weaver/Picatinny, Pulsar Thermion

Priporočeni nosilec je primeren za platformo picatinny. Če vaša puška nima nameščenega vodila picatinny na sprejemniku, lahko ustrezno rešitev najdete tukaj:

- Iznajdi izdelke, primerne za tvojo puško/rokavico

Hvala za razumevanje.

Če boste potrebovali dodatne informacije, nas ponovno kontaktirajte.

S spoštovanjem

Dear Sir,

thank you for contacting us.

According to the provided information we would kindly recommend the following mount:

- INNOmount for Weaver/Picatinny, Pulsar Thermion

The recommended mount is suitable for picatinny platform. If your rifle does not have a picatinny rail installed on the receiver you can find a suitable solution here:

- FIND PRODUCTS SUITABLE FOR YOUR RIFLE/HANDGUN

Thank you for your understanding.

Should you require any additional information please do not hesitate to contact us again.

Kind regards

od Optics Trade team

Katerega potrebujem za Hikmicro Apex

Wich one do I need for Hikmicro Apex

od Dirk

Dragi Dirk,

zahvaljujemo se vam, da ste nas kontaktirali.

Priporočamo vam to držalo za Hikmicro Alpex - https://www.optics-trade.eu/si/innomount-for-weaver-picatinny-extended-30-mm.html

Če boste potrebovali nadaljnjo pomoč, se lahko ponovno obrnete na nas.

S spoštovanjem.

Dear Dirk,

thank you for contacting us.

We would recommend you this mount for Hikmicro Alpex - https://www.optics-trade.eu/si/innomount-for-weaver-picatinny-extended-30-mm.html

Should you require any further assistance, please do not hesitate to contact us again.

Kind regards.

od Optics Trade team

Zdravljeni, imam Merkel Helix in nameravam namestiti Hawke Endurance 30 WA SF. Katero snemljivo montažo priporočate za to in kakšno višino BH? Hvala, Rich

Hi, I have a Merkel Helix and plan to mount a Hawke Endurance 30 WA SF. What detachable mount do you recommend for this and what BH height? Thanks, Rich

od Rich

Dragi Rich,

zahvaljujemo se vam, da ste nas kontaktirali.

Montaža INNOmount, ki jo omenjate, bo popolna za vašo kombinacijo. Za priporočilo pravilne višine BH bi potrebovali natančne podatke o objektivu daljnogleda.

Če imate dodatna vprašanja ali pomisleke, se obrnite neposredno na nas na naslov [email protected]. Tu smo, da vam pomagamo.

S spoštovanjem,

Dear Rich,

thank you for contacting us.

The INNOmount that you are referring to will be perfect for your combination. We would need to have exact information on the scope's objective in order to recommend the correct BH height.

If you have any further questions or concerns, please do not hesitate to contact us directly at [email protected]. We are here to help.

Kind Regards,

od Optics Trade team

Za Steyr Scout .308. Ali je vaš INNOMOUNT QD priložen obročkom ali je treba obročke kupiti posebej? Iščem, da bi namestil Trijicon 30 mm Credo v tradicionalni položaj namestitve nad izmetno odprtino.

For Steyr Scout .308. Does your INNOMOUNT QD come with rings or do the rings have to be purchased separately? Looking to fit Trijicon 30mm Credo in traditional mount position above ejection port.

od Dwain

Dragi Dwain,

zahvaljujemo se vam, da ste nas kontaktirali.

Montaža INNOmount, ki jo omenjate, vključuje osnovo za Picatinnyjevo tirnico in dva 30 mm obroča.

Če imate dodatna vprašanja, se obrnite neposredno na nas na [email protected]

S spoštovanjem,

Dear Dwain,

thank you for contacting us.

The INNOmount you are referring to includes a base for a Picatinny rail and two 30 mm rings.

If you have any additional questions, please contact us directly at [email protected]

Kind Regards,

od Optics Trade team

potrebujem optično pritrditev za Steyr Scout 34mm cev 50mm objektivni objektiv mora biti montaža v slogu weaver za Steyr Scout Ne vidim nobene vaše spletne strani?

need a scope mount for a steyr scout 34mm tube 50mm objective lens needs to be a weaver style mount for the Steyr Scout I don't see any of your website?

od David

Dragi David,

zahvaljujemo se vam, da ste nas kontaktirali.

Če imate na puški tirnico Picatinny, bo ta nosilec INNOmount deloval odlično.

Če imate dodatna vprašanja ali pomisleke, se obrnite neposredno na nas na naslov [email protected]. Tu smo, da vam pomagamo.

S spoštovanjem,

Dear David,

thank you for contacting us.

If you have a Picatinny rail on your rifle, then this INNOmount will work perfectly.

If you have any further questions or concerns, please do not hesitate to contact us directly at [email protected]. We are here to help.

Kind Regards,

od Optics Trade team

Ali bo to ustrezalo modelu Marlin 1895 SBL?

Will this fit on a Marlin 1895 SBL?

od Jim

Dragi Jim,

zahvaljujemo se vam, da ste nas kontaktirali.

Prilegala se bo, vendar boste morali na svojo puško Marlin 1895 pritrditi tirnico Picatinny.

Če boste potrebovali dodatno pomoč, se obrnite na nas na naslov [email protected]

S spoštovanjem,

Dear Jim,

thank you for contacting us.

It will fit, however, you will need to attach a Picatinny rail to your Marlin 1895 rifle.

If you require any further assistance please do not hesitate to contact us at [email protected]

Kind Regards,

od Optics Trade team

Katero višino bi priporočili, če želim ohraniti merke na puški 1895, hkrati pa imeti tudi daljnogled. Leupold 30 mm cev VX5 HD 3X15 44 mm akopej

What height would you recommend if I want to keep the 1895 sights on while having the scope as well. Leupold 30mm tube VX5 HD 3X15 44mm acope

od Jim

Dragi Jim,

zahvaljujemo se vam, da ste nas kontaktirali.

Priporočamo višino BH 17 mm.

Če boste potrebovali nadaljnjo pomoč, se lahko ponovno obrnete na nas.

S spoštovanjem.

Dear Jim,

thank you for contacting us.

We would recommend the 17mm BH height.

Should you require any further assistance, please do not hesitate to contact us again.

Kind regards.

od Optics Trade team

Ta montaža je primerna za puškomer Hikmicro Alpex A50T

fits this mount with the Hikmicro Alpex rifle scope A50T

od Dirk

Drage gospod,

zahvaljujemo se vam, da ste nas kontaktirali.

Ta montaža bi ustrezala, vendar bi za pravilno delovanje potrebovali dodatno visoke obroče.

Če imate dodatna vprašanja ali pomisleke, se obrnite neposredno na nas na naslov [email protected]. Tu smo, da vam pomagamo.

S spoštovanjem,

Dear Sir,

thank you for contacting us.

This mount would fit, however, you would need extra high rings in order to work properly.

If you have any further questions or concerns, please do not hesitate to contact us directly at [email protected]. We are here to help.

Kind Regards,

od Optics Trade team

Zdravljeni, želim kupiti INNOMOUNT za picatinny / weaver, 30 mm za Bergara BA13 cal. 30.06. Pištola ima tovarniško nameščeno weaver tirnico. Ali je INNOMOUNT za picatinny / weaver, 30 mm primeren za mojo pištolo? Ali lahko priporočite sistem za hitro odpenjanje z obročki 30 mm, ki je združljiv z railom weaver? Kakšen je dobavni rok za Romunijo? Hvala!

Hello, I want to purchase INNOMOUNT for picatinny / weaver, 30mm for a Bergara BA13 cal. 30.06. The gun has a weaver rail installed from the factory. Is the INNOMOUNT for picatinny / weaver, 30mm correct for my gun? Can you recommend a quick release system with 30mm rings compatible with the weaver rail? What is the delivery time for Romania? Thank you!

od Alin

Drage gospod,

zahvaljujemo se vam, da ste nas kontaktirali.

Zdraven INNOMOUNT za picatinny / weaver, 30 mm morate kupiti naslednji del:

INNOmount Weaver Recoil Stopper
https://www.optics-trade.eu/en/innomount-weaver-recoil-stopper.html

Tudi s tem delom morate odstraniti zamašek Picatinny na nosilcu.

Srčen pozdrav

Dear Sir,

thank you for contacting us.

Along with the INNOMOUNT for picatinny / weaver, 30mm you have to purchase the following part:

INNOmount Weaver Recoil Stopper
https://www.optics-trade.eu/en/innomount-weaver-recoil-stopper.html

You should then remove the Picatinny recoil stopper on the mount with this one.

Kind regards

od Optics Trade team

Hi, kakšen obroč in višino bi potreboval za sako s20 in swarovski z8i

Hi what ring and height would I need for the sako s20 and swarovski z8i

od vic

Drage gospod,

zahvaljujemo se vam, da ste se obrnili na nas.

Prosimo, da nas kontaktirate na [email protected] in nam sporočite, kateri puškogled Z8i imate.

Veselim se vašega sporočila.

S spoštovanjem

Dear Sir,

thank you for reaching out to us.

Please contact us at [email protected] and let us know which Z8i riflescope you have.

Looking forward to hearing from you.

Kind regards

od Optics Trade team

Zdravljeni, Najmanjši vijaki na tem, katere vrste bitov so? Mislim tiste majhne, ki zaklepajo druge vijake/čepe Hvala/Thomas

Hello, The smallest screws on this, what type of bits are they? I mean the small ones that lock the other screws/pins Thanks/Thomas

od Thomas

Drage gospod,

zahvaljujemo se vam, da ste nas kontaktirali.

Vijaki na sistemih INNOMOUNT uporabljajo glave Torx.

Če boste potrebovali kakršno koli dodatno pomoč, nas brez oklevanja opet kontaktirajte.

S spoštovanjem

Dear Sir,

thank you for contacting us.

The screws on INNOMOUNT systems use Torx heads.

Should you require any further assistance, please do not hesitate to contact us again.

Kind regards

od Optics Trade team

Ali to vključuje optične obroče, kot je prikazano na sliki, in kakšna bi bila vaša priporočena višina za 56 optičnih koncev. Ali bo to neposredno nameščeno na sako s20?

Does this include the optic rings as pictured and what would be your recommended height fir a 56 optic end. Also will this for directly on to a sako s20?

od Ben

Dragi Ben,

zahvaljujemo se vam, da ste nas kontaktirali.

Podstavek za Picatinnyjevo tirnico + 30 mm obročki je vključen. Za 56 mm optiko predlagamo višino BH 17 ali 20 mm, odvisno od znamke in modela daljnogleda.

Če imate kakršnakoli dodatna vprašanja ali pomisleke, se obrnite neposredno na nas na naslov [email protected]. Tu smo, da vam pomagamo.

S spoštovanjem,

Dear Ben,

thank you for contacting us.

The base for the Picatinny rail + 30 mm rings is included. For the 56 mm optics, we would suggest a BH height of 17 or 20 mm, depending on the brand and model of the scope.

If you have any further questions or concerns, please do not hesitate to contact us directly at [email protected]. We are here to help.

Kind Regards,

od Optics Trade team

Drage Ben,

zahvaljujemo se vam, da ste nas kontaktirali.

Ano, nosilec vključuje obročke. Da, prilega se modelu Sako S20. Prosimo, da nam na naslov [email protected] sporočite, kakšen daljnogled imate, da vam bomo lahko pomagali najti pravilno višino BH.

Veselim se vašega odgovora.

S spoštovanjem.

Dear Ben,

thank you for contacting us.

Yes, the mount includes the rings. Yes, it will fit the Sako S20. Please let us know at [email protected] about the scope you own so we can help you find the correct BH height.

Looking forward to hearing from you.

Kind regards.

od Optics Trade team

Hallo, želel sem vprašati naslednje, imam Mannlicher Steyer Elite puško in Kahles Helia 2,5x10x50mm obseg, 30mm cev, bi to BH 20mm ne bo previsoka?

Hallo, I wanted to ask following, I have Mannlicher Steyer Elite rifle and Kahles Helia 2,5x10x50mm scope, 30mm tube, would this BH 20mm will be not too high?

od Ints

Drage gospod,

Za vaše povpraševanje se vam zahvaljujem. Ker naj bi bil premer objektiva vašega daljnogleda enak 56 mm, bi bila tudi 14 mm različica BH dovolj visoka.

S spoštovanjem

Dear Sir,

Thank you for your inquiry. Since the objective diameter of your scope should equal 56 mm, even the 14 mm BH version would be high enough.

Kind regards

od Optics Trade team

Če namestim Zeiss conquest DL 3-12 X 50, kateri hitri sprožilec je primeren? Ali ustreza 14 mm višina BH? S spoštovanjem, David

If I instal Zeiss conquest DL 3-12 X 50, which quick release innomout suitable? Does 14mm BH height fit? Regards, David

od David

Dragi David,

Zdravo, da ste se obrnili na nas. Možnost višine BH 14 mm bi morala dejansko ustrezati vašim potrebam.

Če boste potrebovali nadaljnjo pomoč, se lahko ponovno obrnete na nas.

S spoštovanjem

Dear David,

Thank you for contacting us. The 14 mm BH height option should indeed suit your needs.

Should you require further assistance, please do not hesitate to contact us again.

Kind regards

od Optics Trade team

Zdravljeni, če namestim Zeiss Duralyt 2-8 X 42 na svojo puško Sako A7 3006. Kateri hitri sprožilec Innomount je primeren? Ali je višina 14 mm BH dobra? S spoštovanjem, David

Hi, If I instal Zeiss Duralyt 2-8 X 42 to my Sako A7 3006 rifle. What kind of quick releases Innomount suitable? Does 14mm BH height good? Regards, David

od David

Dragi David,

Zdravo, da ste se obrnili na nas. Ta INNOMOUNT v različici z višino BH 14 mm bi moral dejansko ustrezati vašim potrebam.

Če boste potrebovali nadaljnjo pomoč, se lahko ponovno obrnete na nas.

S spoštovanjem

Dear David,

Thank you for contacting us. This INNOMOUNT in the 14 mm BH height version should indeed suit your needs.

Should you require any further assistance, please do not hesitate to contact us again.

Kind regards

od Optics Trade team

Gledam hitro snemljivo montažo za namestitev Swarovski z8 2, 3-18x56p na moj sako s20. Kaj lahko priporočite. Hvala

I am looking for a quick detach mount to put a Swarovski z8 2, 3-18x56p onto my sako s20. What can you recommend. Thank you

od Mathew

Draga cenjena stranka

zahvaljujemo se vam, da ste stopili v stik z nami.

Prosimo, upoštevajte, da je nosilec INNOmount, ki ga omenjate, popolnoma primeren za puško Sako S20. Višina BH vašega nastavka mora biti srednja (17 mm), da bo delo udobno.

Če imate dodatna vprašanja ali pomisleke, se obrnite neposredno na nas na naslov [email protected]. Tu smo, da vam pomagamo.

S spoštovanjem,

Dear valued customer

thank you for contacting us.

Please note that the INNOmount you are referring to is perfectly suitable to fit the Sako S20 rifle. The BH height of your mount should be medium (17 mm) in order to work comfortably.

If you have any further questions or concerns, please do not hesitate to contact us directly at [email protected]. We are here to help.

Kind Regards,

od Optics Trade team

Hi Imam pulsar termion lrf, nameščen na picatinny rail, ki bi ga rad postavil Innomount hitro sprostitev vrnitev v ničlo, saj gre na več pušk, ki se relief oči spreminja cilj poskuša ohraniti obseg tako nizko, kot je mogoče .What Hight of mount is required Regards Roddie .

Hi I have a pulsar thermion lrf mounted on a picatinny rail I would like to put a Innomount quick release return to zero mount as its going on multiple rifles which the eye relief varies aim trying to keep the scope as low as possible .What Hight of mount is required Regards Roddie .

od Roddie

Dragi Roddie,

Hvala za vaše povpraševanje. Iskreno se opravičujemo za zapozneli odgovor, ki je posledica povečanega povpraševanja po naših storitvah.

Višino BH, ki jo potrebujete, lahko izmerite z uporabo te preproste formule: Vzemite zunanji premer objektiva vašega puškogleda, nato odštejte premer cevi in rezultat delite z 2. Na primer: Če je zunanji premer objektiva vašega puškogleda 60 mm, premer cevi pa 30 mm, od 60 odštejete 30 in dobite 30. Nato morate 30 deliti z 2, da dobite 15, kar je najkrajša višina BH, ki jo lahko izberete (15 mm).

Če boste potrebovali dodatno pomoč, se lahko ponovno obrnete na nas.

S spoštovanjem,

Dear Roddie,

Thank you for your inquiry. We sincerely apologize for the delayed reply, which is a result of the increased demand for our services.

You can measure the BH height you need by using this simple formula: Take the outer diameter of your riflescope's objective, then subtract the tube's diameter, and then divide the result by 2. For example: If your riflescope's outer objective’s diameter is 60 mm, and your tube diameter is 30 mm, you would subtract 30 from 60 and get 30. Then you would need to divide 30 by 2 to get 15, which would be the shortest BH height that you could choose (15 mm).

Should you need any further assistance, please do not hesitate to contact us again.

Kind regards,

od Optics Trade team

Ali bo ta montaža delovala na Vortex Viper 5 25 50 na Ruger 300 PRC .

Will this mount work on a Vortex Viper 5 25 50 on a Ruger 300 PRC .

od Lynn

Draga Lynn,

Za vaše povpraševanje se vam zahvaljujem. Iskreno se opravičujemo za zapozneli odgovor, ki je posledica povečanega povpraševanja po naših storitvah.

Če je vaša puška Ruger 300 PRC opremljena z vodilom Picatinny, potem je ta INNOMOUNT za picatinny / weaver, 30 mm primeren za vaš Vortex Viper 5-25x50.

Če boste potrebovali dodatno pomoč, se lahko ponovno obrnete na nas.

S spoštovanjem,

Dear Lynn,

Thank you for your inquiry. We sincerely apologize for the delayed reply, which is a result of the increased demand for our services.

If your Ruger 300 PRC rifle came with a Picatinny rail, then yes, this INNOMOUNT for picatinny / weaver, 30mm is suitable for your Vortex Viper 5-25x50.

Should you need any further assistance, please do not hesitate to contact us again.

Kind regards,

od Optics Trade team

Mam Sako S20 i kalibra 270 win. Kakšno višino bh priporočate za Kahles Helia 2-10x50? In ali je nastavek primeren za Sako S20?

I have a Sako S20 i caliber 270 win. What bh height do you recommend for a Kahles Helia 2-10x50? And does the mount fit the Sako S20?

od Henrik

Drage gospod,

Za vaše povpraševanje se vam zahvaljujem. Iskreno se opravičujemo za zapozneli odgovor, ki je posledica povečanega povpraševanja po naših storitvah.

Ano, ta nastavek ustreza puški Sako S20. Optimalna višina Bh, ki jo priporočamo za Kahles Helia 2-10x50, je 14 mm. Če pa nameravate kdaj v prihodnosti namestiti termično optiko, vam priporočamo, da izberete višino Bh 17 mm.

Doufamo, da nam je uspelo odgovoriti na vaše vprašanje. Če boste potrebovali nadaljnjo pomoč, se lahko ponovno obrnete na nas.

S spoštovanjem,

Dear Sir,

Thank you for your inquiry. We sincerely apologize for the delayed reply, which is a result of the increased demand for our services.

Yes, this mount does fit the Sako S20 Rifle. The optimal Bh height we would recommend for Kahles Helia 2-10x50 is 14 mm. If you, however, plan on mounting a thermal optic at some point in the future, we would recommend you opt for a Bh height of 17 mm.

We hope we managed to answer your question. If you need any further assistance, please do not hesitate to contact us again.

Kind regards,

od Optics Trade team

Zdravljeni. Pravkar sem kupil Merkel Helix in nameravam namestiti zeiss conquest V4 4-16 x 50. Katero snemljivo montažo bi predlagali in kakšno višino? Hvala, Séamus

Hello there. I have just purchased a Merkel Helix and plan to mount a zeiss conquest V4 4-16 x 50. what detachable mount would you suggest and what height? Thanks, Séamus

od Seamus

Dragi Seamus,

zahvaljujemo se vam, da ste nas kontaktirali.

Predlagamo ta nosilec iz podjetja MAKuick z višino BH 17 mm:

https://www.optics-trade.eu/si/makuick-one-piece-mount-merkel-rx-helix-30mm.html

Če boste potrebovali dodatne informacije, nas lahko kontaktirate na [email protected]

S spoštovanjem,

Dear Seamus,

thank you for contacting us.

We suggest this mount from MAKuick, with 17mm BH height:

https://www.optics-trade.eu/si/makuick-one-piece-mount-merkel-rx-helix-30mm.html

If you will need any additional information you can contact us at [email protected]

Kind regards,

od Optics Trade team

Zdravljeni, imam Sako S20 in želim nekaj hitrih nastavkov za Thermion 2 XP50 in Leopold mark4. 4,5-14x50. Vidim, da priporočate Innomount, vendar nisem prepričan o višini? Hvala

Hi, I have a Sako S20 and want some quick release mounts for a Thermion 2 XP50 and Leopold mark4. 4.5-14x50 scopes. I see you recommend Innomount but I’m not sure of the hight? Thanks

od Roger

Drage gospod,

zahvaljujemo se vam, da ste nas kontaktirali.

Priporočamo višino BH 20 mm.

Če boste potrebovali nadaljnjo pomoč, se lahko ponovno obrnete na nas.

S spoštovanjem

Dear Sir,

thank you for contacting us.

We would recommend a BH height of 20 mm.

Should you require any further assistance, please do not hesitate to contact us again.

Kind regards

od Optics Trade team

Zdravljeni v Optics Trade, gledam na to montažo za Merkel Helix in postavitev na Pulsar Helion XP50. Ali se bo to prilegalo Merklovemu delovanju?

Hello at Optics Trade, I'm looking at this mount for Merkel Helix and putting on Pulsar Helion XP50. Will this fit Merkel action?

od Ivan

Drage gospod,

zahvaljujem se vam za vaše vprašanje.

Potrdimo lahko, da je ta nosilec res primeren za Merklovo vijačnico.

Če boste potrebovali nadaljnjo pomoč, nas brez oklevanja opet kontaktirajte.

S spoštovanjem

Dear Sir,

thank you for your question.

We can confirm that this mount is indeed suitable for Merkel Helix.

Should you require any further assistance, please do not hesitate to contact us again.

Kind regards

od Optics Trade team

Hallo Optics-Trade Team Zanima me, da bi dobil Innomount Picatinny / Weaver QD 1 kos 30 mm obroča, vendar nisem prepričan o zahtevani višini, tj. 14 ali 17 mm. Trenutno uporabljam 44-milimetrski daljnogled (SigSauer BDX6 Sierra 3-18 x44) na srednje velikih obročih Leupold QRW2. Zanima me, ali bi bila velikost 14 mm dovolj, saj imajo srednji Leupoldovi obroči višino sedla 9,6 mm, tj. 4,4 mm nižje. Drugo vprašanje je, ali je enota standardno opremljena z možnostjo namestitve na Picatinny (5 mm aksialni omejevalnik) in Weaver (3,8 mm aksialni omejevalnik) letev? Prosim, svetujte. Lep pozdrav

Hallo Optics-Trade Team I am interested in getting a Innomount Picatinny / Weaver QD 1 piece 30mm ring piece but I am unsure about the required height i.e. 14 or 17mm. I am currently using a 44mm lens scope (SigSauer BDX6 Sierra 3-18 x44) on medium Leupold QRW2 rings. I wonder if the 14mm size would be enough as the medium leupold rings have a saddle height of 9.6mm i.e 4.4mm lower. The other question is if the unit comes standard with the option to fit to a Picatinny (5mm axial stop) as well as a Weaver (3.8mm axial stop) rail? Please, advise. Kind regards

od Jochen

Drage gospod,

zahvaljujemo se vam, da ste nas kontaktirali.

Prosimo, da nam sporočite, katero Picatinnyjevo tirnico imate nameščeno na puški, da bomo lahko izračunali optimalno višino (BH) sistema INNOMOUNT. Informacije nam pošljite po e-pošti na naslov: [email protected]

V zvezi z drugim vprašanjem: privzeta zapora proti odmetu na tem nosilcu je debela približno 5 mm, zato bo ustrezala le tirnici Picatinny. Vendar lahko ta omejevalnik odboja zamenjate s tanjšim omejevalnikom odboja (približno 3,8 mm), zaradi česar je nosilec primeren za namestitev na tirnico Weaver. Če želite, da je nosilec opremljen s tanjšim zamaškom proti odmetu (za Weaver rail), ga morate zahtevati po e-pošti: [email protected]

Pravičujemo se za pozen odgovor.

Če boste potrebovali nadaljnjo pomoč, se lahko ponovno obrnete na nas.

S prijaznimi pozdravi

Dear Sir,

thank you for contacting us.

Please let us know which Picatinny rail you have installed on your rifle, for us to be able to calculate the optimal height (BH) of the INNOMOUNT. Please email us the information to: [email protected]

As for the second question, the default recoil stopper on this mount is approx. 5 mm thick and will therefore only fit on the Picatinny rail. However, this recoil stopper can be replaced with a thinner recoil stopper (approx. 3.8 mm), making the mount fit to be installed on a Weaver rail. For the mount to come with the thinner recoil stopper (for Weaver rail), it must be requested at email: [email protected]

We would like to apologize for the late reply.

Should you require any further assistance, please do not hesitate to contact us again.

Kind regards

od Optics Trade team

Zdravljeni, imam težavo z mojim infirayovim puškogledom za nočni vid, ki me zaslepi, vendar imam že višje montažne obroče od leupolda

Hallo ich habe das Problem bei meinem infiray nachtsicht zielfernrohr das mich der schalldämpfer blendet hab aber schon von leupold die höheren montageringe

od Michael

Drage gospod,

zahvaljujemo se vam, da ste nas kontaktirali.

To je posledica prenizke montaže. Kupiti boste morali nosilec z ustrezno višino namestitve. Upoštevajte, da lahko za toplotne naprave Infiray izberete poseben nosilec določenega proizvajalca. Morali bi natančno vedeti, o katerem modelu govorimo.

Če boste potrebovali dodatno pomoč, se lahko ponovno obrnete na nas na naslov [email protected]

S spoštovanjem,

Dear Sir,

thank you for contacting us.

This is due to a too low mount. You will need to purchase a mount with an adequate mounting height. Please note that for the Infiray thermal devices you can choose a specific mount from a certain manufacturer. We would need to know exactly which model are we talking about.

Should you require any further assistance, please do not hesitate to contact us again at [email protected]

Kind Regards,

od Optics Trade team

INNOMOUNT za picatinny / weaver, 30 mm to je komplet za montažo gledalca

INNOMOUNT voor picatinny / wever, 30 mm is deze compleet voor montage kijker

od John

Drage gospod,

zahvaljujemo se vam, da ste nas kontaktirali.

Je, to je popolna montaža.

S spoštovanjem

Dear Sir,

thank you for contacting us.

Yes, this is a complete mount.

Kind regards

od Optics Trade team

zdravo, ali je to popolno ali morate naročiti še kaj več

hello is this complete or do you need to order something more

od John

Drage gospod,

zahvaljujemo se vam, da ste nas kontaktirali.

To je popolna montaža.

S spoštovanjem

Dear Sir,

thank you for contacting us.

It is a complete mount.

Kind regards

od Optics Trade team

Zdravljeni, imam Merkel Helix in S&B 30mm cev in 56mm objektiv, naj izberem višino BH 14mm ali 17mm

Hi, I have a Merkel Helix and a S&B 30mm tube and 56mm objective lens, should a choose a BH height 14mm or 17mm

od Joakim

Dragi gospod/panj,

zahvaljujemo se vam, da ste nas kontaktirali.

Za višino BH vam priporočamo 17 mm ali več.

Zahvaljujemo se vam za razumevanje in vas prosimo, da nas ponovno kontaktirate, če vam lahko pomagamo na kakršen koli drug način.

Dear Sir/Madam,

thank you for contacting us.

For the BH height, we recommend you 17mm or higher.

Thank you for your understanding and please do not hesitate to contact us again if we can assist you in any other way.

od Optics Trade team

Montaža ATN thor 4LT na bolt action ruger american 7.62x39 pictanny rail ali imate montažo za mene, če da, ali mi lahko pošljete meritve hvala.

Mounting ATN thor 4LT on bolt action ruger american 7.62x39 pictanny rail do you have a mount for me if so could you send me measurements of it thanks.

od Lewis

Drage gospod,

zahvaljujemo se vam, da ste nas kontaktirali.

Želeni izdelek si lahko ogledate na spodnji strani.

https://www.optics-trade.eu/en/innomount-for-picatinny-weaver-atn-x-sight-4k-pro-thor-4.html

Če boste potrebovali nadaljnjo pomoč, se lahko ponovno obrnete na nas.

S spoštovanjem,

Dear Sir,

thank you for contacting us.

You can take a look a the desired product on the page below.

https://www.optics-trade.eu/en/innomount-for-picatinny-weaver-atn-x-sight-4k-pro-thor-4.html

Should you require any further assistance, please do not hesitate to contact us again.

Kind Regards,

od Optics Trade team

Zdravljeni. rad bi kupil Leica Fortis 1-6x14 (rail) ali Zeiss V6 1-6x24 (rail) , kateri je boljši? rail za browning bar mk3 in muont za zeiis rail to rail. Ali lahko ponudite celoten komplet in morda je mogoče dobiti posebno ceno za celoten komplet. Hvala.

Hello. i like to buy Leica Fortis 1-6x14 (rail) or Zeiss V6 1-6x24 (rail) , which is the better one ? rail for browning bar mk3 and muont for zeiis rail to rail. Can you offer full set, and maybe its possible to get special price for full set. Thanks.

od vilmantas

Drage gospod,

zahvaljujemo se vam, da ste nas kontaktirali.

Vljudno vas prosimo, da nas v zvezi s to zadevo kontaktirate na naslov [email protected]. Poskušali vam bomo priporočiti najboljši izdelek v skladu z vašimi potrebami.

Za razumevanje se vam zahvaljujemo.

Če boste potrebovali kakršne koli dodatne informacije, nas brez oklevanja ponovno kontaktirajte.

S spoštovanjem

Dear Sir,

thank you for contacting us.

We would kindly like to ask you to contact us at [email protected] regarding this matter. And we will try to recommend you the best product according to your needs.

Thank you for your understanding.

If you will need any additional information please do not hesitate to contact us again.

Kind Regards

od Optics Trade team

HELLO MY FRIENDS I HAVE A TIKKA T3 IN 338 WM PICATINNY RAIL WHAT DO QD SCOPE MOUNT DO YOU ADVISE ME TO USE, THE SCOPE IS A MEOPTA 3 X 18 X 50 OPTICA 6

od sam

Za kaliber .338 Winchester Magnum vam priporočamo jekleno držalo namesto aluminijastega. Za naše priporočilo nas kontaktirajte na [email protected].

Because of the .338 Winchester Magnum caliber, we would recommend you a steel mount instead of an aluminum one. For our recommendation please contact us at [email protected].

od Optics Trade team

Zdravljeni. imam sauer 101 z osnovo ali tirnico weaver, ali se ta vrsta innomounta prilega moji pištoli?

Hi. I have a sauer 101 with weaver base or rail, does this type of innomount fit on my gun?

od Jan

Ta pritrditev je privzeto zasnovana tako, da ustreza Picatinnyjevi tirnici (ne Weaver). Če imate res tirnico Weaver, vas vljudno prosimo, da v komentar naročila dodate, da je v paket vključena zaporka Weaver za odmet.

This mount is designed to fit a Picatinny rail (not Weaver) by default. If you indeed have the Weaver rail, we would kindly ask you to add the order comment to include the Weaver recoil stopper in the package.

od Optics Trade team

Zdravljeni, naročil sem Vixen VIII 1-6x24. Imam Tikka t3 z nastavkom picatinny. Katero montažo naj izberem? En mir ali dva. Ali lahko priporočite, kateri moram kupiti

Hello, I Ordered Vixen VIII 1-6x24. I have Tikka t3 with picatinny mount. What Innomount I should chose. One peace or two peaces. Could You recommend which I need to buy

od Nerijus

Priporočamo vam namestitev, ki jo omenjate. Višina BH mora biti čim nižja za širokokotni puškogled.

We would recommend the mount which you are referring to. The BH height has to be as low as possible for a wide-angle riflescope.

od Optics Trade team

Zdravljeni, želim kupiti enodelno montažo s hitrim sproščanjem za picatinny rail/Swarovski Z6i s 30 mm cevjo in 56 mm objektivom. Kateri model bo ustrezal?

Hi, I want to purchase a one piece quick release mount for a picatinny rail/Swarovski Z6i with 30mm tube and 56mm objective lens. Which model will fit?

od Davy

Za puškogled Swarovski Z6i 2,5-15x56 morate izbrati višino BH 17 mm.

For a Swarovski Z6i 2.5-15x56 riflescope you should choose a BH height of 17 mm.

od Optics Trade team

Ime

E-pošta

Vprašanje

Send me an email when answer is posted

I want to subscribe to Optics Trade newsletter

I am interested in:

Lov

Taktično in športno streljanje

Opazovanje ptic in narave

Priponke

Drag your file(s) here or click to browse

Only YouTube and Vimeo links are supported.

+ Add another link

Zakaj izbrati Optics Trade?

Široka izbira izdelkov na zalogi
Podpora izkušenih strokovnjakov
Vaše zadovoljstvo je na prvem mestu

Ocene in priporočila

Izdelek je brez ocen

5 zvezdic 0

4 zvezdice 0

3 zvezdice 0

2 zvezdici 0

1 zvezdica 0

Imate morda že izkušnje s tem izdelkom?
Zelo bi bili veseli vaše ocene tega izdelka:

Ocenite izdelek

How do you rate this product?

Ocena

1 star 2 stars 3 stars 4 stars 5 stars

Vzdevek

Povzetek

Mnenje

Drag your file(s) here or click to browse

Only YouTube and Vimeo links are supported.

+ Add another link

Uporabniške datoteke

Osebne izkušnje ostalih uporabnikov so lahko nekomu v veliko pomoč. Z deljenjem svojih posnetkov, fotografij in mnenj o izdelkih pripomorete k lažji odločitvi bodočih kupcev.

Video

Za dodatne informacije si oglejte naše video vsebine o izbranem izdelku:

INNOMOUNT for Picatinny / Weaver, 30mm Photo slideshow VIDEO

Objave

Oglejte si ostale ustvarjene vsebine, povezane z izbranim izdelkom:

INNOmount QD Mount for Weaver / Picatinny, 30 mm

Čas odpreme in dostave

Čas vračila

Izdelki na zalogi

Stanje

BH višina

Previs (KR)

Cena

Nakup

Product Information

SKU

EAN

BH višina

Previs (KR)

Akcijska cena:

Cena

All prices

Price Matrix

Valuta

Redna cena

Akcijska cena:

Popust %

Informacije o naročilu

SKU

Order Number

Datum

Buyer

Količina

Stock Information

SKU

Supplier

Supplier Identifier

Količina

Barcode

Pomoč pri dostavi

Izberite državo pošiljanja in ponudnika dostave

Spreminjanje lokacije

Pomoč uporabnikom

INNOmount QD Mount for Weaver / Picatinny, 30 mm Opis izdelka

ABOUT THE SERIES

ABOUT THE MODEL INNOmount QD Mount for Weaver / Picatinny, 30 mm

ABOUT THE MANUFACTURER

MAIN FEATURES

WARRANTY

IN THE BOX

Splošne lastnosti

Fizične lastnosti

Characteristics

Uporabniška vprašanja

Slike

Slike

Video

Odgovori

Priponke

Uploaded files

Slike

Video

Odgovori

Priponke

Uploaded files

Slike

Video

Odgovori

Priponke

Uploaded files

Slike

Video

Odgovori

Priponke

Uploaded files

Slike

Video

Odgovori

Priponke

Uploaded files

Ask question

Priponke

Uploaded files

Naroči

Zakaj izbrati Optics Trade?