Smartclip is a Slovenian company known for its manufacture of adapters for clip-on devices, noted for their robust construction and superior finish. The adapters feature a distinctive lever that closes inward toward the adapter body, unlike many competitors' adapters where the lever shifts from the rear (loose) to the front (fixed). Hunters often detach the clip-on from the scope to swiftly scan the area. In the dark, particularly when excited by the sounds of nearby wildlife, there's a risk of quickly bringing the device close to the face, potentially poking the eye or surrounding skin with the lever in the loose position. Ludwig Dvojmoč, the company’s founder, developed the unique lever design in response to several injuries caused by traditional lever mechanisms, effectively eliminating the risk of such mishaps.
Ludwig Dvojmoč has experience working with well-known companies in the sports optics industry, such as Zeiss and Aimpoint. He played a pivotal role in establishing the Slovenian chapter of the International Practical Shooting Confederation (IPSC) and contributed to the amendment of several rules in the competition overall.
This two-piece adapter is designed for the front-scope mounted clip-on devices with the Guide mounting standard (M33.5x0.75). It consists of the Smartclip AS adapter and the Smartclip reducing ring for the Guide mounting standard (M33.5x0.75).
The AS adapter features the M52x0.75 mounting thread which is often referred to as the Dedal mounting standard. Dedal was the pioneer in producing clip-ons for civilian use, and adapters with this standard were initially tailored for their devices. Nowadays, these adapters are frequently paired with reducing rings or converters to accommodate various mounting standards. When used with devices featuring the M52x0.75 mounting standard, no reducing ring is necessary, making this adapter function as a single unit. However, for devices with different mounting standards, a reducing ring is required, resulting in a two-piece adapter setup. Unlike one-piece adapter solutions, which typically offer limited size options for outer objective diameter, AS adapters provide a comprehensive range, with approximately 99% of all sizes available.
The Smartclip reducing ring for Guide features an M52x0.75 thread for attachment to the AS adapter on one side and a thread for connection to the Guide mounting standard (M33.5x0.75) on the other.
Adapters that serve as a basis for clip-on mounting feature a M52x0.75 thread on one side and a riflescope objective attachment mechanism on the other. If you wish to mount a clip-on with any other thread/bayonet on your riflescope, you have two options. You can either purchase a one-piece solution, which has limited size options, or a two-piece adapter. The two-piece adapter consists of a M52x0.75 thread adapter combined with a suitable reducing ring or converter.
With Smartclip adapters, the number in the adapter’s name indicates the outer objective diameter of the riflescope that it is designed to fit onto (in millimeters). To ensure you choose the correct adapter, measure the diameter of your riflescope’s objective using calipers (see the image below).
Figure 1: Measure the outer objective diameter of your riflescope with calipers.
You can refer to our extensive riflescope outer objective diameter chart for more information.
If you need assistance or are unsure about the measurements, feel free to contact our sales team at [email protected] for help.
Mounting the reducing ring on the adapter
Place the konusring onto the reducing ring, ensuring that the thread on the konusring faces away from the thread used for mounting it onto the clip-on. Align the AS adapter with the M52x0.75 thread in the konusring. Carefully thread the adapter onto the konusring, stopping just shortly of fully threading it.
Mounting a device with the Pulsar Guide mounting standard (M33.5x0.75) on the reducing ring
Position the reducing ring so that it is aligned with the attachment system on the clip-on. Connect the internal thread on the reducing ring with the external thread on the clip-on, threading it fully. Utilize the position ring with the provided wrench to adjust the adapter's positioning, ensuring the lever remains easily accessible when the device is mounted on the clip-on. Once you are satisfied with the positioning, tighten the position ring with the provided wrench.
Mounting the adapter on a riflescope
Start by placing the lever in the open position. Push it away from the adapter body to do this. Next, verify if the adapter fits onto the riflescope's objective. If it doesn't fit properly, you will need to make some adjustments:
Proizvajalec | Smartclip |
---|---|
Accessories series | Smartclip Accessories |
Poreklo | Slovenija |
V proizvodnji od | Ne |
Garancija | 10 let |
SKU | S2AG |
Material | Aluminij |
Barva | Črna |
Dodatki za | Termični dodatek |